regularly clean the condenser?Position:Home > Blog > Industry News
Refrigeration equipment, including a lot of equipments: compressor, evaporator, condenser and throttling devices. The compressor should timely check while cleaning the condenser, why need to clean the condenser and how to clean?
Because the condenser in the process cooling water, most of the water contains calcium and magnesium ions and hydrogen carbonates. When the cooling water flows through the metal surface, there is a carbonate formation. In addition, the dissolved oxygen in the cooling water will cause metal corrosion, rust formation. The generation of rust, condenser heat transfer effect is reduced. Had severe housing outside spray cooling water, can clog pipes heavily scaled so that the effect of the loss of heat transfer effect. Research data show that the scale deposits on heat transfer loss of a tremendous impact, with the increase in deposits will result in energy costs. Even a very thin layer of scale necessary to increase the device scale of 40% or more part of the operating costs. Keep free of mineral deposits in the cooling channels is good to improve efficiency, energy conservation, to extend the life of the equipment, saving production time and costs.
Condenser cleaning method is a kind of traditional cleaning methods, such as mechanical methods (shaving, brushing), high-pressure water, chemical cleaning (pickling) and so many problems in the device for cleaning: not completely remove scale, etc. sediment, acid formation caused by corrosion of equipment loophole residual acid corrosion of materials to produce secondary or corrosion under the scale, resulting in replacement of equipment, in addition, cleaning toxic waste, requires a lot of wastewater treatment funds.
For the above, efforts to develop domestic and less corrosive to metal cleaning agent, and now successfully developed the world blessed Tektronix cleaning agent, which is highly efficient, environmentally friendly, safe, non-corrosive characteristics, not only a good cleaning effect and no corrosion of equipment, to ensure long-term use of the condenser. Fu World Tektronix cleaner (add unique wetting and penetration agents, can effectively remove the most stubborn scale water equipment arising, rust, grease, slime and other sediments, and will not cause harm to the human body, not iron and steel, copper, nickel, titanium, rubber, plastics, fibers, glass, ceramics and other materials to produce corrosion, pitting, other adverse reactions such as oxidation, which can greatly extend the life of the equipment.
For the above, efforts to develop domestic and less corrosive to metal cleaning agent, successfully developed the world blessed Tektronix cleaning agent, which is highly efficient, environmentally friendly, safe, non-corrosive characteristics, not only a good cleaning effect and no corrosion of equipment, to ensure long-term use of the condenser. Fu World Tektronix cleaner (add unique wetting and penetration agents, can effectively remove the most stubborn scale water equipment arising, rust, grease, slime and other sediments, will not cause harm to the human body, not iron and steel, copper, nickel, titanium, rubber, plastics, fibers, glass, ceramics and other materials to produce corrosion, pitting, other adverse reactions such as oxidation, which can greatly extend the equipment life.
Some equipment used in the process must be carried out cleaning and maintenance, the correct way to use for maintenance, which is to increase equipment life, at the same time, that is why a lot of people thinking about other people's goods than it used. From the above, when use of the condenser people must timely clean the condenser, check compressor.